
How to Remove and Clean Your Shower Head
Your shower is more than just a place to get clean—it's an essential part of your self-care routine. That's why upgrading to the Weddell Duo Shower Filter is such a game-changer. Designed to reduce harmful contaminants like chlorine and PFAS, it ensures that every drop of water is safer and gentler on your skin and hair. While you wait for your Weddell Duo to arrive, these preparation steps will help you get ready for a cleaner, healthier showering experience.
How to Remove Your Existing Shower Head
Removing your shower head is a straightforward process, and you probably already have everything you need. Here’s how:
What You’ll Need:
- Adjustable wrench (only if the shower head is stuck)
- A soft cloth or rag
- Plumber's tape (optional, for reinstallation)
- Distilled white vinegar* (if your shower head is stuck)
- *Note: Since vinegar is acidic, extended exposure can damage the finish on chrome, brass, or nickel shower heads. To prevent discoloration or corrosion, avoid soaking these finishes longer than recommended.


Instructions
-
Turn Off the Water Supply:
Ensure the shower is off before you start. While it’s not necessary to shut off the main water supply, double-check that no water is flowing. - Unscrew the Shower Head by Hand: Most shower heads can be unscrewed by simply turning them counterclockwise by hand. Grip the base of the shower head firmly and twist to loosen it.
-
If It’s Stuck, Don’t Force It:
If the shower head doesn’t budge, avoid applying too much force to prevent damaging the shower arm. Instead, soak the connection area in distilled white vinegar for 15–30 minutes. You can do this by wrapping a vinegar-soaked cloth around the joint or securing a vinegar-filled plastic bag over it with a rubber band. This will help loosen any mineral buildup. (Optional) Use a Wrench:
If the vinegar soak doesn’t fully loosen it, wrap a soft cloth around the shower arm to protect it from scratches and use an adjustable wrench to gently turn the shower head counterclockwise.Inspect the Shower Arm:
Once removed, check the threads of the shower arm for old plumber's tape or debris. Clean it thoroughly to ensure a smooth installation later.
💡 Did you know?
Did you know? According to a national study by the Water Research Foundation in 2016, the average shower uses roughly 17 gallons of water and lasts around eight minutes. For a typical four-person household, that adds up to about 68 gallons of water used daily for showers alone!
With this much water flowing through your shower every day, installing a high-performance shower filter like the Weddell Duo ensures every drop is cleaner and safer for you.

How to Clean Your Shower Head (Optional)
Even if your shower head isn’t visibly clogged, routine cleaning can help optimize water flow and improve water efficiency. Over time, even small amounts of mineral buildup can impact the pressure and distribution of water. Regular maintenance ensures that your shower stays in top condition, whether you’re installing the Weddell Duo or simply refreshing your bathroom setup.
What You'll Need
- Distilled white vinegar
- A plastic bag
- Rubber band or twist tie
- Small cleaning brush or old toothbrush


Instructions
Prepare a Vinegar Soak
Fill a plastic bag halfway with distilled white vinegar.Attach the Bag to the Shower Head
Submerge the shower head in the vinegar-filled bag, ensuring the nozzles are fully covered. Secure the bag with a rubber band or twist tie around the shower arm.Let It Soak
Allow the shower head to soak for 1–2 hours. Note that because vinegar is acidic, extended exposure can damage the finish on chrome, brass, or nickel shower heads. To prevent discoloration or corrosion, avoid soaking these finishes longer than recommended.Scrub and Rinse
Remove the bag and rinse the shower head thoroughly with warm water. Use a small cleaning brush or old toothbrush to gently dislodge any remaining debris from the nozzles.(Optional) Reattach the Shower Head
If you’re not installing your Weddell Duo just yet, rewrap the shower arm threads with fresh plumber's tape and screw the shower head back on clockwise. Tighten it gently by hand.
Why Prep Now?
Preparing your shower ahead of time ensures that your Weddell Duo installation will be a breeze. Plus, cleaning your current shower head can improve water flow and make it ready to use.
By following these simple steps, you’ll set the stage for a smoother, cleaner, and healthier showering experience with the Weddell Duo.
Ready for the Next Step?
Preparing your shower ahead of time ensures that your Weddell Duo installation will be a breeze. Plus, cleaning your current shower head can improve water flow and make it ready to use.
By following these simple steps, you’ll set the stage for a smoother, cleaner, and healthier showering experience with the Weddell Duo.
Need more help? Check out our Installation Guide for step-by-step instructions and visit our FAQ page for answers to common questions.

Team Weddell Water
We're a passionate group of experts and self-care enthusiasts dedicated to revolutionizing the way you experience water. Based in Orange County, California, our team combines the expertise of PhD engineers, researchers, and health advocates to create innovative water filtration solutions like the Weddell Duo, ensuring cleaner, safer water for everyone.
0 comments